Physical Chemistry I Lab

Error Propagation Calculator (v. 3):

Error Propagation Calculator – Excel

How to Use:

Step 1 – Download the file above, open it in Excel (choose “enable content” or “enable macros” if prompted), and press the huge button shown below. If you get an error message about macros despite this, go to the bottom of this page to learn how to solve the issue:Step 1

Step 2 – Input your numbers into the 4 boxes.


Step 3 – Choose the mathematical operation you desired to do for “a” and “b.” A pop-up window will reveal the results of the calculation and the resulting propagated error.

Step 3

Step 4 – Since nobody wants to write out numbers manually, the results of Step 3 will be temporarily saved to the two small text boxes at the bottom of the window (highlighted in the following picture). They can be copied and pasted from here.

Step 4

Step 5 (Optional) – If you wish to perform another calculation based on the results you just obtained, you do not have to re-input the numbers yourself. Press one of the “Substitute last answer” blue boxes to have the program copy the answer to the input boxes.

Step 5


If you have trouble opening the program, it’s likely because you have macros disabled in your Excel settings. To solve this, go to File, then Options (may be different for older versions of Excel). Navigate to “Trust Center” (shown below), and click “Trust Center Settings.” Finally, under “Macro Settings,” select “Enable all macros” if they are currently disabled.


Note: Make sure that you keep as many digits as possible throughout your error propagation calculations to get full credit on Chem 33 lab calculations.

Last Update: 9/28/12