Tufts Robotics Club

So I continued work on the shield and changed quite a few things from the last design. First, I decided to move the […]

Take a look at our gripper doing its thing: Some notes from testing: Water is much more effective at creating negative pressure […]

Lately I’ve been busy designing a shield for the Intel Galileo which will interface all of our actuators. This includes the linear […]

The arm we are building will need some form of control. Since we are cost minded, and we happened to have an […]

Our system involves a lot of actuators that are powered off a 12V source. If all actuators are stalled at once, you’re […]