SETUP AND SAFE OPERATION
- Set the light behind the machine to 2
- 1 blade is pushed down and cuts (one tooth like chizel)
- Place piece along the straight edge (fence) flat on the table
- Make sure the mark on your piece is coincident with edge of the table
- Place hands on piece away from blade guard
- Step firmly on foot bar (support yourself for balance and watch your toes)
- Bar is spring loaded so be careful when stepping off
- If piece falls under the machine, sit on the bar and grab your piece
- No burr on piece because it pushed it all off at once
CLEANUP
- Clean table, floor, and surrounding work area
- TURN OFF LIGHT
Leave a Reply